Nowadays, there are many hotels, baths, office buildings, schools, hospitals and factories. At the same time, there are air-conditioning centralized cooling and domestic hot water supply. Carrier launched 30HXC total heat recovery screw unit, through the discharge of water chillers into the atmosphere The condensed heat is recovered to make hot water, which makes the energy of central air conditioning effective. Using, the energy consumption of users is greatly reduced, the economic benefit is effectively improved, and at the same time, it can be reduced. Environmental pollution caused by condensation heat. 30HXC total heat recovery screw unit is energy-saving. New choice of environmental protection air conditioning system.
Working principle of Carrier 30HXC full heat recovery screw chiller Carrier 30HXC full heat recovery screw chiller adopts single-cylinder double-loop condenser. Structural design, by adding a heat recovery loop to recover all condensation heat. As shown in the figure The unit with heat recovery option is shown. There is hot water in and out on the condenser. Interface, convenient for users to install and use.
Flowchart of Carrier 30HXC Total Heat Recovery Screw Chiller System When cooling: turn on the cooling water pump and turn off the hot water pump. The unit is in refrigeration priority mode. Run. Heat recovery: turn on the hot water pump and turn off the cooling water pump. The unit can give priority to refrigeration. Mode operation, controlling the outlet water temperature of evaporator; It can also be transported according to the heat recovery priority mode. Ok, control the temperature of hot water.
In winter, there are suitable low-temperature heat sources (such as groundwater, surface water, soil source, medium) Water, etc.) can be used, the low-temperature heat source water can be connected to the evaporator of the unit, through the whole Preparation of high temperature hot water by heat recovery unit. In this case, the total heat recovery unit can be completed. Completely replace the boiler and make hot water all year round.
Option description
The water chamber interfaces of evaporator and condenser can be reversed respectively.
The standard unit water chamber interface is on the right side of the unit (with the control cabinet as the front), and this option provides the left water chamber interface.
Evaporator and condenser water chamber can provide
1.6MPa/2.1MPa high pressure option.
Cryogenic unit
Outlet temperature range of low-temperature ethylene glycol or salt solution evaporator: -6℃~+4℃
Some models can provide the lowest temperature option of -10℃ to meet the needs of process refrigeration application.
Silent cabinet
The first generation of quiet speakers can reduce the noise of the unit by more than 10dB(A) on average: the installation and disassembly are convenient, which has no influence on the maintenance and management of the unit and has a beautiful appearance (see P3 in this book).
First generation static speaker
| model | measure(mm) | weight(kg) |
| 30HXC050-065E | 2505*1150*2100 | 480 |
| 30HXC080E-110E | 3105*1150*2100 | 500 |
| 30HXC130E | 3575*1192*2143 | 600 |
| 30HXC165E | 3315*1192*2143 | 600 |
| 30HXC200E | 3575*1192*2143 | 600 |
| 30HXC250E | 3724*1221*2212 | 700 |
| 30HXC300E | 4224*1221*2212 | 700 |
| 30HXC350E-400E | 5800*1300*2300 | 1000 |
Unit hoisting
Note: Each chain hoist must be able to bear the full weight of the machine.
The center of gravity of the unit should be placed on the bearing beam.
It is forbidden to use the lifting lug on the condenser for lifting.
Note: Each lifting chain must be able to bear the full weight of the machin
The center of gravity of the unit should be placed on the bearing beam.
It is forbidden to use the lifting lug on the condenser for lifting.
(mm)
| model | X | Y | Z | W | L |
| 30H110CH-HR | 1348 | 590 | 935 | 2000 | 1200 |
| 30H130CH-HR | 1781 | 603 | 935 | 2000 | 1200 |
| 30H165CH-HR | 2090 | 605 | 906 | 2000 | 1200 |
| 30H200CH-HR | 1615 | 616 | 867 | 2000 | 1200 |
| 30H250CH-HR | 1971 | 576 | 1035 | 3500 | 1200 |
| 30H300CH-HR | 1971 | 576 | 1035 | 3500 | 1200 |
| 30H350CH-HR | 2259 | 569 | 808 | 3500 | 1200 |
| 30H400CH-HR | 2259 | 569 | 808 | 3500 | 1200 |
Product application advantages
Carrier 30HXC screw chiller is characterized by its chlorine-free (no consumption of ozone layer at all) and high efficiency (less power consumption).
Contribution to greenhouse effect), high reliability, easy maintenance, low operating cost, etc., and it is a hotel, restaurant. The central air conditioning system is the first choice for shops, offices, schools, hospitals, industrial and mining enterprises and many other occasions.
Design for R134a Environmental Leading Refrigerant
R134a has no damage to the ozone layer at all.
R134a products are increasing year by year, and there is no prohibition period.
Energy saving and high efficiency
Adopt new 06N high efficiency screw compressor.
High-efficiency heat transfer tube with Carrier patent
Plate economizer further improves unit efficiency
Multi-compressor design: flexible adjustment according to user's load, better partial load performance.
Electronic expansion valve realizes accurate control, optimizes system operation and improves efficiency.
High Reliability
Double-loop design: the influence of fault shutdown is minimized, which greatly improves the reliability of the unit.
Multi-compressor design: mutual standby function, more reliable system.
Complete protection function makes the unit run without worry.
Each unit leaves the factory after trial operation.
Simple and convenient installation
Users of enclosed motors do not need to install cooling/ventilation devices in the machine room.
The unit structure is compact. The width of all units is less than 1015mm, which is convenient to pass through the standard door and put in place.
The water connection pipe is connected by clamp, which is convenient and quick to install on site.
The unit has been completely filled with refrigerant and lubricating oil before leaving the factory.
The site only needs to connect the water pipe and the main power supply.
Convenient operation and maintenance
Graphical operation interface: the logo is clear at a glance and the operation is simple and convenient.
The on-site maintenance of compressor is convenient.
Low noise (three-stage noise elimination)
Built-in muffler device: reasonable diversion of exhaust airflow, effectively reducing the noise caused by high-pressure exhaust airflow pulsation.
Exhaust muffler: converts part of acoustic energy into heat energy to further reduce the noise of the unit
Silent cabinet: add another sound barrier to the unit to significantly reduce the noise transmitted to the machine room
Microcomputer control system
Microcomputer control system, friendly user interface, clear flow chart display, convenient for guiding operation. Powerful diagnosis, safety guarantee Protection, control and communication functions. PID control is adopted to keep the outlet water temperature of evaporator constant and effectively maintain the stability of unit operation and economy.
Friendly man-machine interface
Advanced control function
The safety protection function is complete
Advanced unit group control function
R134a has no damage to the ozone layer at all. R134a products are increasing year by year, and there is no prohibition period.
